Custom Fire Resistant Cotton Anti Static Arc Protection Flash Suits for Electrical Workers

MATERIAL:IFR® 230g/m2 Permanent Flame Retardant Arc protection

SIZES:S~5XL or made to customer’s requirements

INTERNATIONAL STANDARDS:DL/T 320-2010,NFPA70E,ASTM F1959 etc.

Level of Protection:Arc Protection ATPV - 9.7cal/cm2

COLORS:Blue, Graphite Gray, Orange

DESCRIPTION:

This suit features two pieces ( Jacket & Pants), two slanting insert pocket for functionality and all stress points on pants are bar-tack reinforced for strength.  ATPV: 8cal / 12cal / 21cal etc.

FEATURES:

•Jacket

•Concealed heavy duty zip

•Two set-inner pockets

•Adjustable cuff close by brass studs

•Large pleats in the back for freedom of movement and comfort

•Pants

•Adjustable Elasticized waistband and heavy duty zipper, hook and button closure

•Two front deep inset pockets

•Belt loops

•All stress points are bar tacked

If you have design want to make, we can do as follows:           Web:www.uprotec.com/web                  

1) You send us your design (samples or pictures or some ideas), so that we could know what you want exactly;
2) We make the samples for you then send you the pictures and samples by express;
3) As soon as you receive the samples and approve to us (if any changes we will follow them), then you can place the order to us;

Service we supply                                                                                                                             

1) The new design and new materials are provided as your requirements;
2) We are pleased to be given a test order;
3) The OEM services are available;
4) One-stop service: Satisfy what you want;

FAQ:

How should FR garments fit?

     The looser fitting the FR garments, the more thermal protection the clothing system will provide. Air is a very effective insulator; therefore, maintaining an air gap between the clothing and skin will improve thermal protection. However, a loose fit must be balanced against the hazard of clothing being caught in moving equipment. Most FR products will shrink either the same or less than standard work clothing, and should be sized accordingly.

Care and Maintenance

PROPER WEARING

    FR clothing can only provide protection if the wearer follows garment manufacturers' recommendations for proper use:

    *Do not put on or take off the garment in proximity of flammable gasses, vapors, dusts or in other potentially explosive environments.

    *In potentially explosive atmospheres, proper grounding procedures must be used.

    *Wear garments with the appropriate arc rating as dictated by an electric arc hazard analysis. Consult employer if unsure.

    *Wear garments properly – collars closed, sleeves and cuffs down and secured, shirt tails tucked, closures secured, and other manufacturer recommendations.

    *Wear looser-fitting garments that provide adequate mobility.

    *Do not wear non-FR clothing over FR garments. The outermost layer must be FR

    *Wear only FR or non-melting undergarments (e.g. cotton, silk, wool.)

    *Wash garments thoroughly after each wearing to remove contaminants.

CARE TIPS:   

    Most flame-resistant garments can be handled safely using common laundering and care procedures. However, a few precautions must be followed to ensure your FR garments maintain their maximum effectiveness. Remember: FR clothing is safety equipment that just might save your life. It is imperative to make sure your FR garments are properly cleaned and maintained.

    Carefully follow the manufacturer's care label when laundering FR garments. Many FR fabrics require mild wash and dry conditions to maximize the life of the garment. *Wash new flame-resistant garments prior to wearing.

    *Wash flame-resistant garments separately from standard clothing.